Fanuc

Fanuc alarm: - MISSING MOVE AFTER CNR, CHF

CNC Machine Control Manufacturer
Fanuc
Control Model
10,11,12
- MISSING MOVE AFTER CNR, CHF
Alarm Description

The linear or circular interpolation is not commanded in the block after the block commanded with chamfering, corner R.

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: - MISSING MOVE AFTER CNR, CHF message please post comments below.

Fanuc alarm: PS431 - MISSING MOVE AFTER I ~ R

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS431 - MISSING MOVE AFTER I ~ R
Alarm Description

The direction or move distance of the command of the block commanded with chamfering, corner R is odd. The command of the next lock is not correct.

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS431 - MISSING MOVE AFTER I ~ R message please post comments below.

Fanuc alarm: PS430 - CODE ISN'T G10 AFTER I ~R

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS430 - CODE ISN'T G10 AFTER I ~R
Alarm Description

The command after the block commanded with chamfering, corner R is not G01. Example) N1G01X_K_; N2G00Z_I_;

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS430 - CODE ISN'T G10 AFTER I ~R message please post comments below.

Fanuc alarm: - MISSING VALUE AT CNR, CHF

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
- MISSING VALUE AT CNR, CHF
Alarm Description

The block with chamfering, corner K is inserted, so the value exceeds previous moving command range.

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: - MISSING VALUE AT CNR, CHF message please post comments below.

Fanuc alarm: PS429 - MISSING VALUE AT I ~ R

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS429 - MISSING VALUE AT I ~ R
Alarm Description

The move distance in the block commanded with chamfering, corner R is less than the chamfering, corner R amount.

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS429 - MISSING VALUE AT I ~ R message please post comments below.

Fanuc alarm: PS428 - MISMATCH AXIS WITH I ~ R

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS428 - MISMATCH AXIS WITH I ~ R
Alarm Description

I (K) was commanded as X axis (Z axis) command of the block commanded with chamfering, corner R. R01X_I_; G10Z_Z_;

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS428 - MISMATCH AXIS WITH I ~ R message please post comments below.

Fanuc alarm: PS427 - NOT ONE AXIS MOVE WITH I ~ R

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS427 - NOT ONE AXIS MOVE WITH I ~ R
Alarm Description

Move command of the block commanded with chamfering, corner R is not one axis command. Example) G10X_Z_K;

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS427 - NOT ONE AXIS MOVE WITH I ~ R message please post comments below.

Fanuc alarm: PS426 - TOO MANY ADDRESS

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS426 - TOO MANY ADDRESS
Alarm Description

Two or more I, (J), K, R are commanded in the same block commanded with chambering, corner rounding. Example) G01X_K_R;

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS426 - TOO MANY ADDRESS message please post comments below.

Fanuc alarm: PS422 - NOT FOUND TOOL DATA

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS422 - NOT FOUND TOOL DATA
Alarm Description

Pot number, tool length compensation value, and cutter compensation value corresponding to the tool number, or the commanded tool number are not set. (Tool offset by tool number)

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS422 - NOT FOUND TOOL DATA message please post comments below.

Fanuc alarm: PS421 - SETTING COMMAND ERROR

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS421 - SETTING COMMAND ERROR
Alarm Description

Setting command of the tool data (G10L70 - G11/G10 L71 - G11) is wrong. (Tool offset by tool number)

Additional Suggestions & Alarm Clarification

Check your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS421 - SETTING COMMAND ERROR message please post comments below.
Subscribe to Fanuc

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer