Fanuc

Fanuc alarm: SR821 - CD OFF (1)

CNC Description: Signal quality detection signal of reader/puncher interface 1 turned off.
Fanuc alarm: SR821 - CD OFF (1)

Fanuc alarm: SR822 - OVERRUN ERROR (1)

CNC Description: The next character was received before reading a character received by reader/puncher interface 1.
Fanuc alarm: SR822 - OVERRUN ERROR (1)

Fanuc alarm: SR823 - FRAMING ERROR (1)

CNC Description: Stop bit of a character received by reader/puncher interface 1 was not detected.
Fanuc alarm: SR823 - FRAMING ERROR (1)

Fanuc alarm: SR824 - BUFFER OVERFLOW (1) (RS232C-1)

CNC Description: Data exceeding 10 characters were received after sending the stop code (DC3) when the NC receives data by reader/puncher interface 1.
Fanuc alarm: SR824 - BUFFER OVERFLOW (1) (RS232C-1)

Fanuc alarm: SR805 - ILLEGAL COMMAND

CNC Description: An attempt was made to specify an illegal command for puncher/reader interface. A system error in most cases.
Fanuc alarm: SR805 - ILLEGAL COMMAND

Fanuc alarm: SR806 - DEVICE TYPE MISS MATCH

CNC Description: Such a job as cannot be done by I/O device being selected by setting was specified. Example) Heading of a file was specified without using FANUC cassette.
Fanuc alarm: SR806 - DEVICE TYPE MISS MATCH

Fanuc alarm: SR807 - PARAMETER SETTING ERROR

CNC Description: An I/O interface was specified without being selected at the option or a set value of setting/parameter related to I/O interface was in error.
Fanuc alarm: SR807 - PARAMETER SETTING ERROR

Fanuc alarm: SR320 - H.S.C. ERROR

CNC Description: A macro interrupt occurred during the high-speed machining.
Fanuc alarm: SR320 - H.S.C. ERROR

Fanuc alarm: SR424 - OVER MAXIMUM TOOL DATA

CNC Description: Number of setting of tool data exceeds to the maximum allowable number of setting of tool data. (Tool offset by tool number)
Fanuc alarm: SR424 - OVER MAXIMUM TOOL DATA

Fanuc alarm: SR590 - TH ERROR

CNC Description: TH alarm (A character with a parity error was specified in the significant information section.)
Fanuc alarm: SR590 - TH ERROR

Syndicate content

Search