Fanuc

Fanuc alarm: OT001 - PLUS OVERTRAVEL (SOFT 1)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
OT001 - PLUS OVERTRAVEL (SOFT 1)
Alarm Description

When the tool was moving in the plus direction it entered the forbidden area of stored stroke limit I.

Additional Suggestions & Alarm Clarification

You either overtraveled the machine or the machine does not know where it is. Power down and up and home machine. If it does not reach zero return position temporarily open up overtravel limits to allow a successful zero return. Be sure to change back parameters!

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: OT001 - PLUS OVERTRAVEL (SOFT 1) message please post comments below.

Fanuc alarm: SW010 - BUBBLE FREE MODE AVAILABLE

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
SW010 - BUBBLE FREE MODE AVAILABLE
Alarm Description

Free mode switch of bubble memory was turned on.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: SW010 - BUBBLE FREE MODE AVAILABLE message please post comments below.

Fanuc alarm: SW000 - PARAMETER ENABLE SWITCH ON

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
SW000 - PARAMETER ENABLE SWITCH ON
Alarm Description

Parameters are settable. (Parameter: Data No. 8000 PWE=1)

Additional Suggestions & Alarm Clarification

Parameter write enable is on or was left on change 8000 back to 0

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: SW000 - PARAMETER ENABLE SWITCH ON message please post comments below.

Fanuc alarm: SB011 - GRAPHIC RAM PARITY (BLUE)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
SB011 - GRAPHIC RAM PARITY (BLUE)
Alarm Description

A parity error occurred in RAM for blue graphic.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: SB011 - GRAPHIC RAM PARITY (BLUE) message please post comments below.

Fanuc alarm: SB011 - GRAPHIC RAM PARITY (GREEN)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
SB011 - GRAPHIC RAM PARITY (GREEN)
Alarm Description

A Parity error occurred in RAM for green graphic.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: SB011 - GRAPHIC RAM PARITY (GREEN) message please post comments below.

Fanuc alarm: SB011 - GRAPHIC RAM PARITY (WORK)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
SB011 - GRAPHIC RAM PARITY (WORK)
Alarm Description

A parity error occurred in graphic work RAM.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: SB011 - GRAPHIC RAM PARITY (WORK) message please post comments below.

Fanuc alarm: SB010 - GRAPHIC ROM PARITY

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
SB010 - GRAPHIC ROM PARITY
Alarm Description

A parity error occurred in graphic ROM.

Additional Suggestions & Alarm Clarification

May have to reformat or reinitialize graphic memory

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: SB010 - GRAPHIC ROM PARITY message please post comments below.

Fanuc alarm: OH001 - LOCKER OVERHEAT

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
OH001 - LOCKER OVERHEAT
Alarm Description

NC cabinet is overheated.

Additional Suggestions & Alarm Clarification

Open elecrtrical cabinet and see if problem goes away. If it does check fans on drives and in cabinet.

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: OH001 - LOCKER OVERHEAT message please post comments below.
Subscribe to Fanuc

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer