10/11/12

Fanuc alarm: WRONG MODE - WRONG MODE

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
WRONG MODE - WRONG MODE
Alarm Description

The mode is not correct. Parameter input wsa attempted in a mode other than MDI Select MDI mode.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: WRONG MODE - WRONG MODE message please post comments below.

Fanuc alarm: WRITE PROJECT - WRITE PROJECT

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
WRITE PROJECT - WRITE PROJECT
Alarm Description

No data can be entered because the memory protection key (work coordinate value, offset value, and program) is in effect, or parameter entry is impossible because the data number 8000 PWE used to enable writing parameter is set to 0.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: WRITE PROJECT - WRITE PROJECT message please post comments below.

Fanuc alarm: EXECUTING OR MODE CHANGING - EXECUTING OR MODE CHANGING

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
EXECUTING OR MODE CHANGING - EXECUTING OR MODE CHANGING
Alarm Description

Data entry is inhibited because the cycle operating or mode changing is in the progress.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: EXECUTING OR MODE CHANGING - EXECUTING OR MODE CHANGING message please post comments below.

Fanuc alarm: PW100 - ILLEGAL PARAMETER (S, I-COMP.)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PW100 - ILLEGAL PARAMETER (S, I-COMP.)
Alarm Description

Parameter error for straightness or inclination compensation.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PW100 - ILLEGAL PARAMETER (S, I-COMP.) message please post comments below.

Fanuc alarm: I0032 - MEMORY ACCESS OVER RANGE

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
I0032 - MEMORY ACCESS OVER RANGE
Alarm Description

An attempt was made to write data or read data from an address which is out of the bubble memory range.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: I0032 - MEMORY ACCESS OVER RANGE message please post comments below.

Fanuc alarm: I0031 - INVALID CODE

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
I0031 - INVALID CODE
Alarm Description

An invalid code was read out of the NC memory.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: I0031 - INVALID CODE message please post comments below.

Fanuc alarm: I0030 - CHECK SUM ERROR (GC5)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
I0030 - CHECK SUM ERROR (GC5)
Alarm Description

The check sum in the page unit of the NC memory is in error.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: I0030 - CHECK SUM ERROR (GC5) message please post comments below.
Subscribe to 10/11/12

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer