Fanuc alarm: 5452 - IMPROPER G-CODE (5AXIS MODE)(M series)
5452 - IMPROPER G-CODE (5AXIS MODE)(M series)
Fanuc's Alarm Description: A G code that cannot be specified is found. (5-axis mode) This alarm is issued when: 1) Three-dimensional cutter compensation (side-face offset and leading- edge offset) is applied during cutter compensation, or cutter compensation is applied during three-dimensional cutter compensation (side-face offset and leading-edge offset). 2) A leading-edge offset of three-dimensional cutter compensation is applied during side-face offsetting of three-dimensional cutter compensation, or a side-face offset of three-dimensional cutter compensation is applied during leading-edge offsetting of three-dimensional cutter compensation. 3) Tool axis direction tool length compensation is applied during tool length compensation, or tool length compensation is applied during tool axis direction tool length compensation. 4) Tool center point control is provided during tool length compensation, or tool length compensation is applied during tool center point control. 5) Tool center point control is provided during tool axis direction tool length compensation, or tool axis direction tool length compensation is applied during tool center point control. If this alarm is issued, cancel the relevant mode, then specify a different mode.
Additional Suggestions & Alarm Clarification:
None currently
Help Others:
Post troubleshooting recommendations for (Fanuc alarm: 5452 - IMPROPER G-CODE (5AXIS MODE)(M series)) error message below.
Fanuc CNC Control Models Applicable:
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
Manufacturing | Industrial | CNC machinist | Maintenance | Repair
